RV CERA MAX 777
Technical performance
Norms: Cass: (C2 TE S1)
Tenshile adhesion : ≥3N/mm2 After 28 Days EN 1348
Coverage : 45 to 55 sq.ft/20 kg bag at 3 mm bed thickness
Setting time: 24 Hrs.
Water ratio: 6 to 7 Ltr water Per Bag of 20 kg Grey and White.
Mixing: Add Clean Water in Rv 777 mix it well until smooth lump free paste is obtained. leave it for 5 minutes then mix it again.
Multipurpose long format highly polymer modified and highly flexible adhesive for installation of extra large format height upto 35 ft(For internal and external use). slim tiles, natural stones, engineered stones on most of the substrates to accommodate movements. It offers very good handling properties with good sag and slump resistance while doing installation on wall or floor respectively under high critical conditions with substrates subject to limited deformations or vibrations
1 review for RV CERA MAX 777
Related products
-
RV CERA MAX ET-555
Read moreMultipurpose high-performance polymer modified fibre reinforced cementitious tile adhesive for installation of medium & large format ceramic/vitrified tiles/glass mosaics /terrazzo & natural stones height upto 20 ft(For internal and external use), on floor and wall where nominal substrate movement is expected. A high-grade adhesive especially for commercial area, where floorings are prone to shocks due to heavy traffic.
-
RV CERA MAX VT-333
Read moreA high polymer modified thin set tile adhesive for fixing all types of ceramic & vitrified tiles height upto 8 ft (For internal and external use). on wall & floors and small size natural stones on floors and wall over cementitious substrates for indoor dry & wet area applications only.
wpthemes –
Little confused with this